Bakım & Parça

CF Moto ATV and UTV Spare Parts Guide: Finding the Right Part

How do you find the right spare parts for CF Moto ATVs and UTVs? Distinguishing between CFORCE, UFORCE, and ZFORCE, matching model codes and engine displacement, part terms such as sprockets, differentials, variators, lug nuts, and rim sizes, and basic maintenance checks.

MotoWing Ekibi4 dk okuma· Güncellendi:
CF Moto ATV UFORCE 1000 ön jant çelik 14-7.0

4 dk okumaGüncellendi:

Finding spare parts for ATVs and UTVs is more complicated than for motorcycles: many models from the same brand have different engine displacements and model codes. In this guide, we explain how CF Moto ATV and UTV owners can find the right part and clarify terms frequently used in part titles.

The Difference Between CFORCE, UFORCE, and ZFORCE

CFORCE CF Moto's ATV series (four-wheeled, with the rider sitting on a seat).
UFORCE Side-by-side UTV series focused on work and hauling.
ZFORCE Side-by-side UTV series focused on sport and off-road riding.

In addition to these, model codes such as 400ATR, CF800ATR, and TRL appear in older models and parts catalogs. Therefore, when searching for parts, look not only at the series name but also at the model code and engine displacement.

To Find the Right Part

  1. Note the model and year on the registration document.
  2. Check the engine displacement (e.g., 400, 500, 625, 800, 1000 cc); parts may differ between different displacements within the same series.
  3. If possible, read or take a photo of the part number on the old part.
  4. Keep the chassis number (VIN) ready; some parts vary depending on the production period.
  5. If you are unsure, write to us with this information; we will check it before you place your order.

Terms in Part Titles

Bevel gear Conical gear. In the differential, it changes the direction of power from the shaft to the axle.
Differential Gear set that distributes power to the axle. 4x4 vehicles have front and rear differentials.
Variator (CVT) Power is also transmitted via a variator with a power belt in ATVs and UTVs; the front variator consists of the front variator, belt, and rear pulley.
Clutch housing Part of the clutch (transmission) assembly.
Camshaft gear Gear that synchronizes the camshaft (cam) with the crankshaft via a chain.
Balance shaft Balance shaft that rotates with the crankshaft to reduce engine vibration.
Lug nut Nut that attaches the wheel to the hub.
Rim 14-7.0 Rim with a 14-inch diameter and 7.0-inch width.
Cylinder 91 mm The inner diameter of the cylinder (piston diameter).

Basic Maintenance Checks

  • Air filter: The air filter gets dirty very quickly when used in dusty terrain; check it frequently. Details are available in our air filter guide.
  • Variator cover and belt: After water crossings, check whether water has entered the variator cover; inspect the belt for wear. For belt wear, see our variator belt guide.
  • Differential and transmission oils: Change these oils, which are separate from the engine oil, at the intervals specified in the manual.
  • Lug nuts: They may loosen during off-road riding; check that they are tightened to the torque specified in the manual.
  • Tire pressure: ATV tires operate at low pressure; check the value specified in the manual with a precise pressure gauge.
  • Axle boots: A torn boot allows mud and water to enter, damaging the joints quickly.

ATV and UTV Parts at MotoWing

If the part you are looking for is not on the list, send a parts request with the model, engine displacement, and part number.

Frequently Asked Questions

What is the difference between CFORCE and UFORCE?

CFORCE is the ATV series where the rider sits on a seat. UFORCE is the side-by-side UTV series focused on work and hauling.

What is a bevel gear?

It is a conical gear. In the differential, it changes the direction of power from the shaft to the axle.

Are parts from different engine displacements within the same series compatible?

Some parts may be common, but this is not always the case. Check the model and engine displacement in the product title; if you are unsure, ask us with the part number.

What does 14-7.0 mean in the rim size?

It indicates that the rim has a 14-inch diameter and a 7.0-inch width.

This text is for general information purposes; refer to your vehicle's owner and service manuals for maintenance intervals and torque values.

Önerilen Ürünler

Tümünü Gör: CF Moto Accessories

Bunlar da ilgini çekebilir

Tüm yazılar